10 Causes of Failure in Driving Tests Colchester
Driving school in Colchester
Earning your driving license is one of the most rewarding experiences of adulthood; however, this requires you to have a high standard of driving ability. For this very reason, Hero Driving School has produced this blog, so you know what the top 10 reasons for failing in driving tests are:
Inappropriate driving at junctions:
It is essential that the mirrors, position, signal, gears and speed are used in a well synchronised manner when nearing a junction. You should also be sure that the road you are entering is safe.
Pull Up On The Right:
Two of the main causes for failure in driving tests are:
Lack of control.
Improper observation of traffic.
Be sure that you are the minimum speed when you are reversing around corners. This will allow you to have adequate control of the car. Be vigilant of oncoming traffic.
Faulty Steering:
Most new models are equipped with “power” steering, which basically allow “one-touch” driving. It is, therefore, important to know how much force you should or should not exert on the steering wheel.
Faulty Parking/Reverse:
These manoeuvres can be challenging, even for the most skilled drivers. As always, it is important to keep an eye on the traffic and to be very light on the accelerator.
Improper use of Gears:
You should be well aware of which gears to use in different settings. When the traffic onslaught is slow or you have an empty road, you can safely drive the car in a high gear. However, when driving on busy or tricky roads, it is best to move the car at a slower pace.
Improper usage of mirrors:
As with all good driving schools, Hero Driving School also puts great emphasis on the use of mirrors while driving. Ideally, you should check your mirrors 25-50% of the time you spend driving. This technique allows you to develop a habit of navigating carefully.
Lack of Acceleration control:
Acceleration is by far, the most important thing when it comes to passing your driving test. It is mandatory for you to know how much the speed limit is and where to or, where not to slow down.
Undue Hesitation:
It is necessary to be careful about not holding up other people on the road. For this reason, you should know how to turn properly. Make a note of checking your mirrors, as well as, controlling your acceleration.
Getting confused at Junctions:
You should be fully aware of the distance and gaps required when you are approaching or, pulling out at a junction.
Restarting from a stationary position:
More often than not, this can cause new drivers unnecessary problems. In order to restart and move on successfully, you should check the gear the car is in, relative mirrors, status of the handbrake and whether the road is clear for you to go.
If any of these problems have occurred during your driving test, you can always discuss how to overcome them, with your driving instructor in Colchester.